Swapping out 8x17 for 8.5 and 9.5x19 on 520D
Hi All,
Just looking for some advice.
I have just bought a 2006 520D but am not too fond of the standard 17" alloys (BMW style 122). I have an older set of 19" (BMW style 220) that a family members swapped off an M3. I wish to put these onto my car but am trying to get my head around tyre choices.
Current setup is 225/50/17 all corners with offset ET20.
Recommended tyre by BMW for the 19":
245/35/19 front offset ET29
265/35/19 back offset ET23.
As the roads that I drive are not always the best i would prefer more rubber between the rim and the road so ideally would like a 45 profile but would settle for a 40 profile.
I have looked into this and have found:
245/40/19 would lead to an increase in diameter of 3.1% on the front.
265/40/19 would lead to an increase in diameter of 5.4% on the back.
I reckon i would need a 15mm spacer on the front and a 20mm spacer on the back.
Has anyone here got a 19" rim of width 8.5 or 9.5 as their current setup?
What tyres have you chosen?
Have you had any offset issues?
Thanks in advance!
RE: Swapping out 8x17 for 8.5 and 9.5x19 on 520D
I've mentioned it here plenty of times. www.willtheyfit.com is a good site to give you a better idea of what the change will be.
RE: Swapping out 8x17 for 8.5 and 9.5x19 on 520D
Quote:
Originally Posted by JohnC
I've mentioned it here plenty of times. www.willtheyfit.com is a good site to give you a better idea of what the change will be.
Hi John,
Thanks for the tip!
Ive tried that site before for both the front and rear configuration and that is where i got the information relating to the spacing requirements.
I am more interested to know if anybody has run with this setup and what their experiences are.
RE: Swapping out 8x17 for 8.5 and 9.5x19 on 520D
Cool,
It's handy alight
From my experience in ach rolling with 19s on 3 series is they need a big enough roll and slight flare.
I've had to do an E60 with 19s before but I can't remember his tyre size. Offset is a big factor too of course.