10 Attachment(s)
Another beautiful E46 M3 for rear subframe reinforcement
Members car , BMW E46 M3 for subframe reinforcement with Redish Motorsport plates and full rear suspension refresh including :
Subframe bushes
Diff front bush
Trailing arm bushes
Complete camber arms
Cambers bolts with washers and nuts
Hub top and bottom ball joints
Rear top arm inner bushes
Rear anti roll bar links
4 wheel tracking after all this job was completed
So the fun begin
Attachment 4914
rear axle removed , washed and ready for some work
Attachment 4915 Attachment 4916
Attachment 4917 Attachment 4918
subframe bushes and hub ball joints installed
Attachment 4919 Attachment 4920
diff front bush and rear top arm inner bushes
Attachment 4921 Attachment 4922
diff to shaft gasket
Attachment 4923
10 Attachment(s)
RE: Another beautiful E46 M3 for rear subframe reinforcement
rear axle removed , few small cracks found , any bit rusty place covered in rust remedy and repair work begun
cracked places cleaned and welded ,welded places fixed with grinder for straight and flat surface . later special plates welded in their places and sharp weld spots grind off .
everything painted with primer ,left to dry and later few coats off stone chip protection -gravitex applied on the top .refreshed rear axle fitted back ,car was left till next day to sit back on its chassis and after 4 wheel tracking was done .
plates and new suspension parts
Attachment 4924 Attachment 4925 Attachment 4926
suspension out ,rust remedy in work
Attachment 4927 Attachment 4928 Attachment 4929
cracks cracks
Attachment 4930 Attachment 4931
Attachment 4932 Attachment 4933
10 Attachment(s)
RE: Another beautiful E46 M3 for rear subframe reinforcement
9 Attachment(s)
RE: Another beautiful E46 M3 for rear subframe reinforcement
8 Attachment(s)
RE: Another beautiful E46 M3 for rear subframe reinforcement
Re: Another beautiful E46 M3 for rear subframe reinforcement
Excellent work Valdas, as usual! Now Shane can take her over 80kph finally hehe :P
Sent from my WT19i using Tapatalk 2
Another beautiful E46 M3 for rear subframe reinforcement
Tremendous work Valdas!! Shane said I could borrow it when it was ready.
RE: Another beautiful E46 M3 for rear subframe reinforcement
Thanks again Valdas, I'm delighted with it! Haven't really had a chance to take her for a blast yet but I will be looking forward to it :hehe!: Andy I said you could have a go in the 116:tounge::tounge: So the project continues :cool: