RE: E60 525d ABS/TC error
Before i even look it up on id say its safe to say your rolling radius is way off with them tyre sizes
Until you change to correct tyre sizes you will continue to get this
When you gather momentum the car thinks its loosing traction due to incorrect tyre size
Edit: this is the change in your rolling radius its far too much
http://img.tapatalk.com/d/14/10/16/agegejy3.jpg
This would be the ideal tyre size if you want to keep the front narrow due to rubbing etc
http://img.tapatalk.com/d/14/10/16/rebehara.jpg
With extra sidewall it should be a less harsh ride then the 30 profile also
If you want to keep the 30 profile
Ihttp://img.tapatalk.com/d/14/10/16/3esezuge.jpg
RE: E60 525d ABS/TC error
Thanks, Gar.
But the diameters have to be the same? Anyway to code around?
RE: E60 525d ABS/TC error
Yep rolling radius needs to be very similiar
The only option is too completely diasble the traction control permenantly best off changing front tyres in the meantime you could turn off the t/c each time you get into the car
RE: E60 525d ABS/TC error
Thank you again, Gar.
This is really helpful. After I active the DTC mode and restrict DSC, the error does not come up this morning.
So we can confirm that the error comes from the different diameter sizes. right?
I think I gonna use these tyres for a while and change them before next NCT, as long as the error not coming up again.
:tounge:
Quote:
Originally Posted by Gar
Yep rolling radius needs to be very similiar
The only option is too completely diasble the traction control permenantly best off changing front tyres in the meantime you could turn off the t/c each time you get into the car