Looking well chief the spacers make a nice difference the front wheels were lost in the archs
Printable View
Looking well chief the spacers make a nice difference the front wheels were lost in the archs
Some updates :
Wiper blades fitted - Valeo ones ,same as BMW does :wink:
Diff oil changed - Castrol one with Red Line Limited Slip Friction Modifier
Gear box oil changed - Castrol one
Oil constant pressure valve changed - BMW one
Oil sump nut with washer replaced - BMW parts ,just got it out before alen key start to spin free inside
Fuel filter will be fitted on tmrw - still had original one from factory :surprised: some shite got out of it
Some clean all around after all this work was done
Gear box oil changed - Castrol one
Attachment 3673 Attachment 3674
Oil constant pressure valve changed - BMW one ,just before it start heavy leak
Attachment 3667 Attachment 3668 Attachment 3669
Oil sump nut with washer replaced - BMW parts ,just got it out before alen key start to spin free inside
Attachment 3670 Attachment 3672 Attachment 3671
Fuel filter will be fitted on tmrw - still had original one from factory :surprised: some sh*** got out of it
Attachment 3665 Attachment 3666
and last ones
Diff oil with modifier
Very good. What does the modifier do?
Regards,
Andy
here U go :wink:Quote:
Originally Posted by Andy
ABOUT RED LINE GEAR OIL FOR DIFFERENTIALS
Fully-synthetic formulas created from polyol ester base stocks, offer excellent lubrication under extreme conditions
High viscosity-index (VI) to provide relatively constant viscosity and film thickness with varying temperature change
Ester base stocks and friction modifiers provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears
Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oils
Exceed API GL-5 specifications
Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear
MORE TECHNICAL INFORMATION
Limited-slip or Positraction units use plates or clutches to provide the proper amount of lock-up to the differential. Slippery lubricants are required to prevent chatter, but too much slipperiness causes excess wheel spin, reducing traction.
For perfect traction, use Red Line 75W90NS and add the Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive until the chatter disappears.
Satisfies performance requirements of GM 1052358, Ford M2C118-A, 19B546-MA, Chrysler 4318060 and most imports.
Recommended Dosage:
Use 4% for prevention of limited slip chatter in broken-in units (typical one 4 oz. bottle) or 4 to 8% for the break-in of new differentials.
Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive will significantly reduce the friction during break-in of differentials. High temperatures encountered in break-in
can destroy the hardening of the gear teeth causing rapid wear of the softened gears. This additive can reduce the break-in temperatures by as much as 50°F, improving break-in conditions. Compatible with petroleum or synthetic gear oils. Red Line Gear Oils already contain this additive (except the NS).
In non limited-slip racing differentials and quick change units using the Red Line ShockProof Gear Oils an additional 3 to 6% Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive is recommended.
Adds on a set of go faster stripes!Quote:
Originally Posted by Andy
How on earth did you get that sump nut out!
it just luck :wink: if try to fit it back one more time it would twist around for sureQuote:
Originally Posted by ciars
and last ones at athe moment