recommendations for a garage to have rod bearing upgrade undertaken

Printable View

26-09-18, 13:40
buckleymark01

recommendations for a garage to have rod bearing upgrade undertaken

Hi guys looking for recommendations for a garage in Ireland or Northern Ireland to have my M3 rod bearings upgrade / replaced ?

Thanks

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk
26-09-18, 14:14
JohnH

recommendations for a garage to have rod bearing upgrade undertaken

If your near the boarder try Prefect Car in Dundalk. If you’re north of Dublin try Courtney Motors in Dublin and if south or West of Dublin try Motor Confidence on the Naas Rd
26-09-18, 15:59
318 iS Cosmos

Don't forget Dave Gormley (DaveG is his username on here) in Wexford
26-09-18, 16:40
doyleeoin

Quote:

Originally Posted by 318 iS Cosmos

Don't forget Dave Gormley (DaveG is his username on here) in Wexford

+1 for Dave. He did mine this year. Take a look at his work on one of his threads.
26-09-18, 17:30
buckleymark01

Thanks guys have heard the following two garages all day 1. Dave Courtney motors Wexford and perfect Cars Dundalk will contact these guys now ��
26-09-18, 18:11
buckleymark01

How about these guys in Dublin DL Motorwork ??

https://www.facebook.com/DLMotorworks/
26-09-18, 19:15
JohnH

Quote:

Originally Posted by buckleymark01

How about these guys in Dublin DL Motorwork ??

https://www.facebook.com/DLMotorworks/

Only person I know who used them ended up getting the car fixed in Courtneys...
27-09-18, 10:37
buckleymark01

Quote:

Originally Posted by JohnH

Only person I know who used them ended up getting the car fixed in Courtneys...

Thanks for the heads up was onto Dave earlier today [emoji108]

Sent from my iPhone using Tapatalk
14-10-18, 13:25
buckleymark01

Thanks all for the input Fionnsport.ie with Finbarr completing the work this week :)
23-10-18, 20:49
buckleymark01

Rod bearings done by Fionnsport Cork [emoji120]now suffer the run in period [emoji23]

Sent from my iPhone using Tapatalk
24-10-18, 10:23
schoonerm3

No run in period needed. Just go handy for 4-500 miles and then drop the oil to allow for any contamination when the sump was off. The crank rides on a film of pressurised oil and does not make contact with the bearings in normal operation.

Run in period is intended for running in engines where there is metal on metal contact such as piston rings, cam lobes etc.

400-500 miles , oil and filter. Then drive as normal.

But of course do what you feel is right. Most garages will tell you to do a run in period to cover them selves I would imagine.
25-10-18, 19:47
buckleymark01

Quote:

Originally Posted by schoonerm3

No run in period needed. Just go handy for 4-500 miles and then drop the oil to allow for any contamination when the sump was off. The crank rides on a film of pressurised oil and does not make contact with the bearings in normal operation.

Run in period is intended for running in engines where there is metal on metal contact such as piston rings, cam lobes etc.

400-500 miles , oil and filter. Then drive as normal.

But of course do what you feel is right. Most garages will tell you to do a run in period to cover them selves I would imagine.

Thanks for that man that is good news for me i suppose they said approx 1,200km about 800 miles not way off your figure of 500 miles so feel confident to split the difference not in to much of a hurry to push her on until next season as see is not my daily driver so have plenty of time to play with �� but do miss that V8 sound right now