Halfords 65 Piece Socket Set for €39.99 - Yay or Nay?

http://www.halfords.ie/motoring-travel/tools-diy/socket-sets/halfords-65-piece-socket-set-1-4-3-8

This set has what I'm looking for at the moment, but then I'm not really looking for much. Does it have most of what you'd generally need/want for small jobs? Is it decent enough quality and value or should I go for a different set?

I was looking at other threads about Halfords socket sets but they're from 2013 so maybe someone knows of a better deal somewhere, also how do you get Halfords discount?

And finally, I need a torque wrench suitable for 9NM, any recommendations on where to get a reasonably good quality/well priced one? They seem to be €100+...?

Thanks Gents :)

That looks like enough to do the basics the imperial sockets will never be used though, I'd be more inclined to get a bigger set when they come on sale without the imperial of possible.

I've this torque wrench (currently €53 incl. Delivery) you'll need a 1/4 to 3/8 adapter if it's for changing spark plugs but they're cheap on eBay.

http://www.amazon.co.uk/gp/aw/d/B000Y8J2CA/ref=mp_s_a_1_1?qid=1429784301&sr=8-1&pi=AC_SX200_QL40&keywords=teng+torque+wrench&dpPl=1&dpID=31U0uWNWtzL&ref=plSrch


Edit: At that torque it's probably not for spark plugs

I got my torque wrenches from here IE Depot as I couldn't find them cheaper than anywhere else.

I also got a 200piece halfords set http://www.halfords.ie/motoring-trav...et-spanner-set at the weekend and have used it a bit since then. It contains lots and is good value for the money but the ratchets aren't as nice as the snap on and teng one's I have.

I have this one, Currently 50% off down to €100.
http://www.halfords.ie/motoring-travel/tools-diy/socket-sets/halfords-advanced-professional-55-piece-socket-set-1-2

It's 1/2" drive instead of 1/4" and 3/8"... So a bit chunkier.
Quality is excellent, Not failed me yet!

If you want to build a few tools, I'd also get a set of ratchet spanners.

Thanks folks :)

Bought this years ago and like above have used it a lot they take everything you can throw at them only thing i really had to buy seperate was a 7mm allen head bit for working on the brakes http://www.halfords.ie/webapp/wcs/stores/servlet/ProductMobileDisplay?catalogId=15551&langId=-1&categoryId=290505&productId=862455&storeId=11101

Why do you need to torque the plugs just hand tighten them iv never torqued mine and the ngk's dont need gap spacing

Buy axle stands and a trolley jack is well if doing bits on the car will make life a lot easier the bmw jacks are rubbish

Halfords stuff will never be teng or similar but for the weekend warrior it's good enough. Have taken apart and put together cars with the set i have. The only issue was i had a knuckle joint socket give on me but to be fair I was under the car using my foot to try move an exhaust bolt. Check the type of metal used to ensure quality. Gar is right about the jacks too, halfords are doing ramps half price currently, thinking about grabbing them myself at the weekend. For doing the sparkplugs I can understand wanting to do it right but as Gar said get them in, go till you get resistance and then another quarter turn and they should be good.

Quote:

---

Originally Posted by Gar

Bought this years ago and like above have used it a lot they take everything you can throw at them only thing i really had to buy seperate was a 7mm allen head bit for working on the brakes http://www.halfords.ie/webapp/wcs/stores/servlet/ProductMobileDisplay?catalogId=15551&langId=-1&categoryId=290505&productId=862455&storeId=11101

Why do you need to torque the plugs just hand tighten them iv never torqued mine and the ngk's dont need gap spacing

Buy axle stands and a trolley jack is well if doing bits on the car will make life a lot easier the bmw jacks are rubbish

---

Thanks Gar, I need the torque wrench for the bolt on the vanos solenoid.

Sorry dont know why i thought you needed it for plugs


Whats the torque value for the solenoids peter 9nm is it ? Sounds super low id just tighten it with my fingers and once you cant tighten it anymore give it a qtr turn with whatever tool you used to remove it

Quote:

---

Originally Posted by Gar

Sorry dont know why i thought you needed it for plugs


Whats the torque value for the solenoids peter 9nm is it ? Sounds super low id just tighten it with my fingers and once you cant tighten it anymore give it a qtr turn with whatever tool you used to remove it

---

Yep 9NM, I saw a few people write that in their DIYs alright. Would rather do it with a torque wrench but at least I won't be stuck if I can't get one.

Most iv seen start from around 20nm under 10 is really precise will be hard to find one cheap id imagine , do you have any cycle shops near you iirc bicycle shops use/deal in low value torque


Edit: never noticed kevins link thats a good one 5-25nm

Quote:

---

Originally Posted by Peter-E36

http://www.halfords.ie/motoring-travel/tools-diy/socket-sets/halfords-65-piece-socket-set-1-4-3-8

This set has what I'm looking for at the moment, but then I'm not really looking for much. Does it have most of what you'd generally need/want for small jobs? Is it decent enough quality and value or should I go for a different set?

I was looking at other threads about Halfords socket sets but they're from 2013 so maybe someone knows of a better deal somewhere, also how do you get Halfords discount?

And finally, I need a torque wrench suitable for 9NM, any recommendations on where to get a reasonably good quality/well priced one? They seem to be €100+...?

Thanks Gents :)

---

I have the 200 piece set, it covers everthing except stupidly large sockets,the case is loaded well and is easily acessed,barring the smaller sockets which can be stiff to pull out, the lifetime warranty does not cover the ratchet spanners iirc, it more than looks after the amateur mechanic and the quality is more than adequate, i was very happy after buying it.

I bought a Halfords socket beet a few years ago and I use some of the 1/2 chrome sockets (non-impact) on an impact gun and have done for the past 2 years and they are holding up great. Only wear showing is the chrome plating flaking off. If they will be used for DIY stuff, sure why noy?