Lads my connection is leaking water everywhere! Am I missing a part?http://uploads.tapatalk-cdn.com/2016...f76d4c04e8.jpg
Sent from my iPhone using shitetalk
Printable View
Lads my connection is leaking water everywhere! Am I missing a part?http://uploads.tapatalk-cdn.com/2016...f76d4c04e8.jpg
Sent from my iPhone using shitetalk
O ring?
Sent from my XT1068 using Tapatalk
I thought that but it's not even connecting to the washer, I tried a few different o rings but no improvement
Edit seems your right, it's missing a small o ring from the tip. Probably better replacing the hose as its ancient anyhow, I reckon the old o ring is stuck in the gun connection and is preventing the hose from connecting properly
Sent from my iPhone using shitetalk
Yea missing a small o ring unfortunately. You might pick one up on eBay if you measure the diameter
Measure the diameter
I have a few small o rings left over from an engine build kit that I wont be using
I only have a big builders measuring tape, would that be precise enough?
Sent from my iPhone using shitetalk
Iv an o ring pick and a digital calipers if you wana drop down tomorrow
Sent from my SM-T230 using Tapatalk
Cheers man see ye then
Sent from my iPhone using shitetalk
If you are still stuck I have a complete box of assorted o rings to pick from
Sent from my XT1068 using Tapatalk
Cheers only seeing this now, was in mcquillans earlier and picked a set up, should get one out of this hopefully Attachment 6278Quote:
Originally Posted by hamish262001
Sent from my iPhone using shitetalk
Handy to have!Quote:
Originally Posted by nigzcurran
Sent from my XT1068 using Tapatalk
Quick update, replaced O rings at both ends and now back in business, feckin nilfisks are beasts
Sent from my iPhone using shitetalk