E61 idrive mask screen replace

Printable View

23-07-17, 23:44
Ron Burgundy

2 Attachment(s)

E61 idrive mask screen replace

So my screen is gone funny... It's just Lines, shapes, different colours, no words or anything, when I use the knob to go into a menu ie ' entertainment ' the lines and shapes change so you know you have gone into a sub menu, radio works and knob works....
No sat nav (just obc option) no climate control and no bt... it's a 6.5 screen so I assume it's the bog standard m-ask version.
I took out the screen to get the part number...
65826962424
65826971414... Seems there are two numbers but they don't match anything on realoem.
Wondering can I just stick any 6.5 screen in cos there is a few different part numbers. Do I have to code it to my existing unit or should I just bite the bullet and update to a ccc unit
Many thanks...
24-07-17, 06:15
crosswired

Hi what year is it?

Sent from my SM-N910F using Tapatalk
24-07-17, 08:40
Ron Burgundy

Quote:

Originally Posted by crosswired

Hi what year is it?

Sent from my SM-N910F using Tapatalk

Morning cross....
It's a 06' reg 523I E61... but it's a 05' production date.
The realoem screenshot I put up is the only 6.5 screen listed for my chassis... There is a long list for 8.8 screens underneath that (out of shot) however, when I click on the 6.5 part number it gives me a hole lot of other part numbers that ' supersedes ' and ' superseds ', Al of which is not the number I pulled out of my car (second alpine screen shot) tks for your time...
24-07-17, 10:19
crosswired

Hi, 8.5 are for ccc mate.
If you're Dublin based, I've got a spare 6.5 screen so we can try to ensure that isn't a cable. I'm based in D7 and I'm pretty free evening from 7

Sent from my SM-N910F using Tapatalk
24-07-17, 11:40
Ron Burgundy

Quote:

Originally Posted by crosswired

Hi, 8.5 are for ccc mate.
If you're Dublin based, I've got a spare 6.5 screen so we can try to ensure that isn't a cable. I'm based in D7 and I'm pretty free evening from 7

Sent from my SM-N910F using Tapatalk

I'm in mayo.... What part number is it
24-07-17, 11:47
crosswired

Taken from the labelhttps://uploads.tapatalk-cdn.com/201...718a024d74.jpg

Sent from my SM-N910F using Tapatalk
24-07-17, 11:48
crosswired

Lol its the same 😊

Sent from my SM-N910F using Tapatalk
24-07-17, 12:05
Ron Burgundy

2 Attachment(s)

Quote:

Originally Posted by crosswired

Lol its the same 😊

Sent from my SM-N910F using Tapatalk

Outstanding.... Sure I'll just buy that one off ya....
24-07-17, 12:06
Ron Burgundy

This is what my screen is doing... See above pics
24-07-17, 12:13
crosswired

Ouch...doesn't look good

Sent from my SM-N910F using Tapatalk
24-07-17, 12:36
Ron Burgundy

Ya. Pain. I only just after pulling out the dash last week to change the heater radiator. Nightmare. The screen was working fine after. If it was a pinched wire because of that, I would think it wouldn't work, never mind half work.
24-07-17, 12:43
crosswired

Hard to say mate, anyways I'll let it go for 30e plus postage if you want it. If you've got parcel motel postage is free I guess 😊

Sent from my SM-N910F using Tapatalk
24-07-17, 13:29
Ron Burgundy

Done... I'll PM you
24-07-17, 13:30
crosswired

Np mate

Sent from my SM-N910F using Tapatalk