E36 Suspension upgrades

Plan on stripping my e36 down to go over the suspension / breaks over the next couple of months, Its a 97 323i. id like to do all bushings and breaks while i have it apart the car is 99% a road car i dont see it ever being in track but at the same time its a weekend car will never be a daily so not overly interested in comfort more interested in performance.

while i have the car apart what suspension upgrades are worth doing along the lines of m3 control arm bushings etc should i got with E46 wishbones or any other typical stuff that will make the car a better drive?

Second question is break wise, what are people running for discs and pads?

again the main purpose for my car is a weekend toy to have fun with so im not too concerned about comfort etc i have my daily for that.

Any input greatly appreciated.

I have a 99 323i. I have bought a good few bits to change in mine over the past few months and I was told changing the rear subframe bushes is a good start to tighten up the back of the car. I went with Febi as they were OEM. Poly bushing is very expensive but worth it if you want a seriously hard ride.

I’ll need to do it on the m3 in the next while and plan to go with OEM. They’ll be a huge improvement on 18 year old bushes etc but will still be comfortable enough for regular use.

I did a full refresh with powerflex bushings in my last Nissan, incredible difference to the handling of the car without rattling you to death like a lot of the cheaper polybushing kits. They have different grades of material to suit different applications as well.

They are significantly more expensive than the competition mind.

Was having a look at the Powerflex stuff add's up fast when you start going through all the bits needed on there website. Been recommended to not go with fully polybushes for a road car some saying its far too harsh for road use but thats subjective i suppose and since the cars only purpose is for a bit of fun on the weekend im not too pushed.

Notice a few lads in the UK using the strongflex stuff, good bit cheaper than powerflex but i wonder is the quality there?

Another option i see a lot of lads in the US using is this https://www.condorspeedshop.com/coll...ion/suspension

trailing arm bushes - polybush
lover camber arms - complete new arms as lemforder
axle stud bushes , rose ball joints - top and bottom with same part,(as top ones) even if lower was rubber one , only in lemforder, don't know why people often wants to replace with poly bushes,ball joint is much much better .
top arm bush- either lemforder or polybush ,up to your choise
subframe bushes - depends on price, lemforder or polybush

Quote:

---

Originally Posted by Valdelisbmw

trailing arm bushes - polybush
lover camber arms - complete new arms as lemforder
axle stud bushes , rose ball joints - top and bottom with same part,(as top ones) even if lower was rubber one , only in lemforder, don't know why people often wants to replace with poly bushes,ball joint is much much better .
top arm bush- either lemforder or polybush ,up to your choise
subframe bushes - depends on price, lemforder or polybush

---

Would you recommend this setup for an old man with m3 too?

Quote:

---

Originally Posted by JohnH

Would you recommend this setup for an old man with m3 too?

---

only lemforder all around !

I bought Febi for my subframe, are they much inferior to Lemforder?

Quote:

---

Originally Posted by James Bond Junior

I bought Febi for my subframe, are they much inferior to Lemforder?

---

Yup, if you haven't fitted them yet, buy Lemforder.


Sent from my iPhone using Tapatalk Pro

Quote:

---

Originally Posted by James Bond Junior

I bought Febi for my subframe, are they much inferior to Lemforder?

---

very possible that its lemforder in febi boxes , 50/50 , its full rubber bush , so it should be ok . that old granny with post or two early is very fussy

Have you been at the sherry again

Quote:

---

Originally Posted by Valdelisbmw

trailing arm bushes - polybush
lover camber arms - complete new arms as lemforder
axle stud bushes , rose ball joints - top and bottom with same part,(as top ones) even if lower was rubber one , only in lemforder, don't know why people often wants to replace with poly bushes,ball joint is much much better .
top arm bush- either lemforder or polybush ,up to your choise
subframe bushes - depends on price, lemforder or polybush

---

exactly what i was looking for, appreciate the help. Who's recommended to get the Lemforder stuff from?

Quote:

---

Originally Posted by BMW-E46

exactly what i was looking for, appreciate the help. Who's recommended to get the Lemforder stuff from?

---

Otto or euro car parts

Sent from my SM-G950F using Tapatalk