If you can’t find someone I can do it here in Cork.Originally Posted by willciviceg5
If you can’t find someone I can do it here in Cork.
Hi guys,
Recently got F10 and trying to hook it up with ISTA + using ENET cable.
Tried everything what I've found on the net even laptops IP set to static but it won't connect mean Enet interface isn't available in ISTA.
I've got edabas.ini set to enet as well...
Any idea what to do? I've tried 2 different cables so isn't the hardware issue.
Any help highly appreciated
Sent from my SM-N950F using Tapatalk
F10 should work with ENET cable. Can you screen shot your ISTA connection settings screen? I'll compare to my set up.
thanks mate,
screens and ediabas.ini attached
My ENET cables are RJ45 of course
I've had connection monitor open and seem theres no comms at all, it just shows bytes sent by laptop when received '0'
Last edited by crosswired; 25-10-18 at 17:31.
Turned out that windows on my laptop was screwed up, did factory reset, installed INPA and ISTA again and all is working now
Sorry I didn’t get a minute to check this for you
No worries mate, all good
Sent from my SM-N950F using Tapatalk
Does anyone have an iCom in the greater Dublin area (I'm in Kildare)?
I'm looking at doing a CIC retrofit in my CCC E92 and the systems are much cheaper and more readily available in the US. I will be in Boston next month so was considering buying a CIC setup there and bringing it home. However I would need iCom to flash the unit.
Posting Permissions
Reply With Quote