Hi,

Have spent the day trying to get INPA up and running on Win7 x64 and I'm having issues. I'm using a bmcables USB to OBD connector and I'm trying to connect to a R56 Cooper D to test before I try configure ADS (with a PCI Serial to RS232 and ADS lead) and connect to the e36.

I've installed Ediabas 6.4.7 and Inpa 5.02 using compatibility mode and I have had no issues.

When I try to connect to the Mini I get the following error:

Group file: D_MOTOR. IFH-0006: COMMAND NOT ACCEPTED

Even if I have the cable attached or detached, or select a different make or model so I'm presuming its something to do with D_MOTOR?

I have the environmental variables set to C:\Ediabas\bin



I've made the following changes in the EDIABAS.INI file:

; RemoteHost
; Description : diaghead //(which I presume this is for DIS not INPA)
; Default =
RemoteHost =192.168.68.1

; Port
; Description : IP communication port
; Value : 1000 < port < 30000
; Default =
Port = 6801

The interface is set to STD:OBD and LoadWin32 = 1.

I've it set up on COM1 as far as I see correctly, and I have the OBD.ini set to use COM1 and USB.

As far as I can see no other services are running that would be using the ediabas process that would interfere with comms.

Any help would be greatly appreciated, its probably something small that I'm missing but its starting to fry my head at this stage