Will E90 18'' wheels fit E60 - advice needed

[crosswired]

hi guys,
as per subject:will E90 18'' wheels fit E60?
any advice highly appreciated
Cheers
kris

[Gar]

Check the felgen katalogue and compare the two wheels

[crosswired]

Check the felgen katalogue and compare the two wheels

thanks mate,
had a look there but can't find these http://www.adverts.ie/alloys-wheels/usedalloys/5703794?notification=68909292ab5b921d82b4485c2f9eb 4e1-1402685287#comment_30868959 wheels (last picture) any ideas what style are these?
cheers

[Gar]

Have never seen them on an f10 before not sure what they are

Offset is very high at et46 whats the e60 offset

[crosswired]

I've no clue about wheels mate ask me how to retrofit a/c or ccc but wheels offsets and other stuff are like black magic for me

Sent from my SM-N9005 using Tapatalk

[Gar]

Im the same but I know the 5's like a low offset like et15 or 20 and 3's usually use high 30's and 40's

Maybe someone else can chime in with more knowledge

[crosswired]

Im the same but I know the 5's like a low offset like et15 or 20 and 3's usually use high 30's and 40's

Maybe someone else can chime in with more knowledge

found... these are off E90 Style 189,
front et34
rear et37

mines:
front et20
rear et43

..whats the verdict ?
cheers

[Valdelisbmw]

i think the picture is not very accurate ,im nearly 100% sure i seen these wheels and they there all 4 same offset ,think it was all 35ET 8.5J

[crosswired]

i think the picture is not very accurate ,im nearly 100% sure i seen these wheels and they there all 4 same offset ,think it was all 35ET 8.5J

I've taken info from felgen website mate
Anyways would these go with e60?
Cheers

Sent from my SM-N9005 using Tapatalk

[crosswired]

Im the same but I know the 5's like a low offset like et15 or 20 and 3's usually use high 30's and 40's

Maybe someone else can chime in with more knowledge

Well I'm not sure got info from felgen website - style 138

e60 and rear et43? you sure?
whan i have e60 i once put mv2 wheel from e46 at the back its was very inside and at mv2 wheel et is around 35-40
E28 5 series
PCD 5/120, centre bore 72.5mm
wheel bolts M12x1.5, 60 degree tapered head, thread length appr 27mm
Offsets ET 18-25

E34 including M5
Offsets ET 13-20
else as above

E39 including M5
CENTRE BORE 74.0mm
Offsets ET 15-25
else as above
E39 standard wheel arch will be fine with a 9.5x19 rear carrying a 275/30/19 tyre if offset is ET25 or slightly more.

E60 including M5
PCD 5/120, centre bore 72.5mm
wheel bolts as above
Offsets ET 12-32

E61
as above and generally the same offsets BUT to use BMW 9x19 or 9.5x19 ET32 wheels, you need to run 5mm spacers to clear inner arch

Both E60 and E61 will take a 10x20 ET20 with either 275.30.20 or 285.25.20 without catching

Sent from my SM-N9005 using Tapatalk