Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: E36 airbag light issue

  1. #1
    BMWHaus Contributor
    Join Date
    Dec 2013
    Posts
    281

    E36 airbag light issue

    I recently replaced the seats in My 318is and in a rush to get the job done, I snipped the 2 wires running up into the seats from underneath. The new seats are Vaders and don't have anything to connect these to.
    What way can I get rid of the airbag light that's now on the dash?Ni heard someone say to use resistors but what value? Also do I need it coded or whatever to get rod of the light after that?
    Thanks in advance,

    Chris

  2. #2
    BMWHaus Contributor
    Join Date
    Dec 2013
    Posts
    281

    RE: E36 airbag light issue

    Cool, thanks. What type of resistors? Like what value or ohms or whatever they're measured in?

  3. #3
    BMWHaus Contributor
    Join Date
    Dec 2013
    Posts
    281

    RE: E36 airbag light issue

    Anyone??????

  4. #4
    Moderator
    Join Date
    Jul 2013
    Posts
    8,000

    RE: E36 airbag light issue

    Might be of use http://www.adverts.ie/5359591

  5. #5
    BMWHaus Contributor
    Join Date
    Jul 2013
    Posts
    470

    RE: E36 airbag light issue

    Measure the resistance of the original seats if you still have them and post it up here, I've a selection of resistors here I'll post you one of the correct value if you measure it.

  6. #6
    BMWHaus Contributor
    Join Date
    Dec 2013
    Posts
    281

    RE: E36 airbag light issue

    Thanks Lads. I dont have the seats still sadly but thanks anyway. If I fond out the correct value I might give you a PM though
    Gar, that night just be the job. Not a clue how to wore it up and dunno if I should be letting this guy wore it as he has offered???

  7. #7
    BMWHaus Contributor
    Join Date
    Dec 2013
    Posts
    281

    RE: E36 airbag light issue

    So these are the 2 wires in question.
    Is the emulator Gar posted a simple, hook it up and the light goes off or what's involved? Will it work?
    Thanks again,

    Chrisimage.jpg

  8. #8
    BMWHaus Contributor
    Join Date
    Aug 2013
    Posts
    619

    RE: E36 airbag light issue

    On my e46 the airbag bypass was a plug and play jobby, you should have a connecter originally on those wires before ye cut them?

    Sent from my C2105 using Tapatalk

  9. #9
    BMWHaus Contributor
    Join Date
    Dec 2013
    Posts
    281

    RE: E36 airbag light issue

    Shit...Woops.

  10. #10
    BMWHaus Contributor
    Join Date
    Dec 2013
    Posts
    281

    RE: E36 airbag light issue

    So where do I go from here anyone?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •