e36 short shift kit and bushings...

[Chrispyfish]

Havent been meaning to do this for a while now and looking for some advice on other peoples set ups.

Is the best short shift kit to go for the one from the z3? and if so, which one? is it the z3m itself?

http://www.realoem.com/bmw/showparts.do?model=CK92&mospid=48084&btnr=25_0013& hg=25&fg=05

Also looking to refresh the gear changes as the bushings are well worn now at 128k so what ones are the best to change?

http://www.realoem.com/bmw/showparts.do?model=BE72&mospid=47426&btnr=25_0013& hg=25&fg=05

Thanks in advance

[claude]

I think i have all the part numbers and prices Chris
will post them shortly
I highly recommend changing all the gearbox bushings it makes the gear know really firm and tight and not an expensive job

Sent from my SM-G900F using Tapatalk

[Chrispyfish]

Perfect thanks Claudio thats EXACTLY what im looking for

[Lucifer]

Just the z3 Chris. Have a rip in mine whenever ya want. Z3m is for 6cyl. The difference is unreal such a change


Sent forward in time from my Nokia 3210

[claude]

Chris i wont give you my part numbers in case they differ from yours but from looking at your realoem link i changed the equivalent partnumbers of
7
4
2
12
order one of each

especially number 4 you will be surprised how much play there is in that bushing after 128k miles

and order a few of 10 and 11 these cir-clips and washers which you will need

all in should work out between 30-40 euro for all and well worth it

i used an Ac Schitzer short shift on mine but i were to buy another i would go for z3 or UUC one
hope that helps

any other questions or info just text me or pm me

[Chrispyfish]

Thanks Richard and Claudio some nice info there

[Ketron]

Thanks Richard and Claudio some nice info there

I've the UUC one Chris, can work out expensive with customs though, its height adjustable as well, you're welcome to try it out

[Chrispyfish]

Thanks for all the advice and offers lads, have the kit ordered from Cab now and this is basically what is needed for the refresh and the short shifter itself

For anybody looking into it:

1x 25-11-7-527-252 - Z3 shifter
1x 25-11-1-220-600 - Shifter bearing
4x 25-11-1-220-439 - Washers
2x 25-11-7-571-899 - Locking clamps
1x 23-41-1-466-134 - Shifter pin
1x 25-11-1-222-688 - Shifter joint
1x 25-11-7-519-669 - Bearing sleeve
1x 25-11-1-222-015 - Shifter bearing