-
RE: Rung my sump nut
It's original sump bolt .very often need to change it if has visual wear tear signs .
-
BMWHaus Guru
-
BMWHaus Contributor
RE: Rung my sump nut
There is an actual tool for removing rounded nuts. Or cheap option
Try a vice grip
Cut a slot in it and try turn with large flat head and vice grip
Weld a nut onto the bolt and open with spanner
Force oversized torix in.
Endless possibilities
-
BMWHaus Contributor
Re: Rung my sump nut
Hi i had a similar problem with a vanos cap nut and had to grind a 3/8 drive in to the nut with a dremel tool
Sent from my LT30p using Tapatalk
-
BMWHaus Contributor
RE: Rung my sump nut
Tap it out with a cold chisel
Sent from my HTC Desire X using Tapatalk
-
Junior Member
Rung my sump nut
Tap/beat in the sacrificial torex bit. Also vice grips on the outside where you can grip and some heat before turning all as one. I would heat up and cool down several times to Allow the oil in the sump to lubricate the threads each time you do this oil will get slightly further down.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules