5 x 120 to 5 x 114.3 adapters where to get

[thetangerine]

Bin lookin around for a set of the above to c if I can fit my Volk Rays wheels on the e46 nd be a bit different too I reckon. All that seems to pop up are 1's from eBay nd no sure I would trust em. Anyone know where I could get a decent set or anyone selling em second hand maybe
Also would wobble bolts do the trick or are they just dangerous anyone have any experience with them or advice

[Hobbs]

I can't help you with where to source adapters man, but personally I wouldn't go near wobble bolts. Id rather pay a machine shop to fab some adapters rather than use them dangerous yokes.

[JohnC]

Alloywheels in ballycoolin ind estate can order in H&Rs spacers.

[thetangerine]

I can't help you with where to source adapters man, but personally I wouldn't go near wobble bolts. Id rather pay a machine shop to fab some adapters rather than use them dangerous yokes.

Was thinkin that wit the wobble bolts arigh the name says it all as a bolt shouldn't wobble really. Only get max 2 mm out of em nd way so def out of the question so how bad. Cheers for the reply tho

[thetangerine]

Alloywheels in ballycoolin ind estate can order in H&Rs spacers.

Not looking for spacers pal something to convert my pcd to Jdm spec of all things

[Keith-n]

Alloywheels in ballycoolin ind estate can order in H&Rs spacers.

Not looking for spacers pal something to convert my pcd to Jdm spec of all things

Anthony Galvin in CAC motorsport carrigtohill or on Facebook. If you want his number pm me. He does all the gear for drifting so he'd be your man.

[JohnC]

Alloywheels in ballycoolin ind estate can order in H&Rs spacers.

Not looking for spacers pal something to convert my pcd to Jdm spec of all things

They do bolt on pcd converters too. They are a h&r retailer.

[Super4]

Bin lookin around for a set of the above to c if I can fit my Volk Rays wheels on the e46 nd be a bit different too I reckon. All that seems to pop up are 1's from eBay nd no sure I would trust em. Anyone know where I could get a decent set or anyone selling em second hand maybe
Also would wobble bolts do the trick or are they just dangerous anyone have any experience with them or advice

If you can send me the following info on the Volk wheels I can look into this for you as I maybe able to come up with a solid solution.

Centre Bore of Volk wheels - Vernier gauge is handy if you have one
Offset of Volk wheels - Should be stamped on the back
Width and diameter of Volk wheels
PCD of Volk wheels - 5 x 114.3????

Hope this helps,

Cab
Super4 BMW

[thetangerine]

Bin lookin around for a set of the above to c if I can fit my Volk Rays wheels on the e46 nd be a bit different too I reckon. All that seems to pop up are 1's from eBay nd no sure I would trust em. Anyone know where I could get a decent set or anyone selling em second hand maybe
Also would wobble bolts do the trick or are they just dangerous anyone have any experience with them or advice

If you can send me the following info on the Volk wheels I can look into this for you as I maybe able to come up with a solid solution.

Centre Bore of Volk wheels - Vernier gauge is handy if you have one
Offset of Volk wheels - Should be stamped on the back
Width and diameter of Volk wheels
PCD of Volk wheels - 5 x 114.3????


Hope this helps,

Cab
Super4 BMW

Hi cab cheers for lookin into dis for me

But centre bore is 66.1
Offset is 36 front and rear but must confirm this at the wkend when I'm around the wheels but fairly sure
Width front is 8 inches and rears are 9 inches and 18 inch diameter
Nd pcd is 5 x 114.3
Thanks again fair play

[E46Padge]

Iam waiting on word back from a machine shop on 50 mm adaptera from steel.. if you want I can ask for you aswell?