E46 m3 Hubs, disc and calipers fitment question

[thetangerine]

Just wondering would there b much hassle in fitting a front set of e46 m3 brakes which would consist of hubs,discs and calipers to an e46 320d. Do I even need the hubs or would I just need the calipers and disc and will they fit under a 16 inch alloy wit an offset of 10. Wat would I expect to pay for dis set up or am I just wasting my money nd would I b better off wit maybe a set of drilled nd grooved discs wit quality pads and a set of braided brake hoses. All comments nd opinions welcome please

[Hobbs]

On what car?

[Gar]

Pretty sure they wont fit a 16" wheel

[thetangerine]

On what car?

Edited an e46 320d

[thetangerine]

Pretty sure they wont fit a 16" wheel

Was kinda thinking that arigh. Disc is nearly 13 inches nd prob another nearly 2 inches wit the calipers I'd b cutting it fine nd he is asking strong money2. Was on mister auto there nd a full set of Bosch discs nd pads front nd rear are only €203 delivered to the door. Are Bosch any good????

[Hobbs]

17in wheel minimum. What 16in wheels do you have with an offset of 10?

[Valdelisbmw]

for front need full hubs! hubs will not fit without M3 wishbones and M3 lower aluminum strengthening plate needed as well
rear brakes will not fit anything ,must be complete E46 M3 wishbones -trailing arms

[thetangerine]

17in wheel minimum. What 16in wheels do you have with an offset of 10?

That's em there, the make is a crowd in Italy I'm let to believe called fomb used to make alloys for momo and 1000miglia from wat I've bein reading on the net. They came on my e34 nd had to hold onto em for my next Beemer. Could do wit a referb to b honest but I think brakes come first

[thetangerine]

for front need full hubs! hubs will not fit without M3 wishbones and M3 lower aluminum strengthening plate needed as well
rear brakes will not fit anything ,must be complete E46 M3 wishbones -trailing arms

Sound for that's pal had a feeling you would have an idea fair play