Results 1 to 8 of 8

Thread: M50b25 engine and box

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    BMWHaus Guru
    Join Date
    Aug 2013
    Posts
    1,453

    M50b25 engine and box

    Change of plan - sorry for any hassle lads.

  2. #2
    BMWHaus Guru
    Join Date
    Jul 2013
    Posts
    3,620

    RE: M50b25 engine and box

    Quote Originally Posted by kdevitt
    Bought this recently from a driver.net site member. Was sold as a clean engine - slight crunch in second. Details provided were:

    yeah, its my own engine, i have that car sinse 2009y and never abused it.

    new air pipes
    new sparkplugs
    new valvestem seals
    new oil
    new vanos repair kit
    new valve cover/spark plug hole gasket
    new gaskets under intake manifold
    compretion good in all cylinders
    m50b20 single mass flywheel with corect presure plate and cluch plate fitted
    ecu has performance chip in it profesionaly done specialy for my car, by my friend.
    car had 0 issues whan it was parked in my garage about 2 years ago.
    only thing i can foult is 2nd gear was a bit sticky when box cold (sinhranisator starts to go)
    and a bit of knocking noise for 2 sec on first cold start on colder morning (hidraulic tapit, dont know which one) its not damaging anything
    My garage went to fit it yesterday and it's not quite as clean as I want for my car. In short, the inlet manifold has a substantial amount of oil in it. Each sparkplug looks fucked, and covered in oil. The oil filter has substantial amounts of metal filings in it. There is also silicon spewing out of several areas that should be sealed with gaskets. Compression figures were very good, but I'm not willing to spend the cash to take it apart, fit new gaskets etc etc.

    So letting it go for a lot less than I paid - EUR250 takes it. Bare in mind that will barely buy the inlet manifold off one if these things these days.

    Its sold as seen quite obviously - the engine was running when sold to me, but I personally wouldn't be happy without taking it apart and fitting the new gaskets etc.
    Armando's? Good price all the same. Glws I'd have it only hands are tied due to a wedding.

  3. #3
    Moderator
    Join Date
    Jul 2013
    Posts
    2,077

    RE: M50b25 engine and box

    Honestly feel for you. Nothing worse than getting stung, Especially from a long term forum member!

    I assume you've tried to contact him with no result?

    Anyway best of luck selling.

  4. #4
    BMWHaus Guru
    Join Date
    Jul 2013
    Posts
    3,908

    M50b25 engine and box

    That's a pain in the stones. Glws

  5. #5
    BMWHaus Contributor
    Join Date
    Sep 2014
    Posts
    431

    RE: M50b25 engine and box

    Is it single or non-vanos? If its non-vanos i might take a chance on it.

  6. #6
    BMWHaus Guru
    Join Date
    Aug 2013
    Posts
    1,453

    RE: M50b25 engine and box

    Hi, its a single vanos engine.

  7. #7
    BMWHaus Contributor
    Join Date
    Jan 2014
    Posts
    659

    M50b25 engine and box

    Quote Originally Posted by Hobbs
    Is it single or non-vanos? If its non-vanos i might take a chance on it.
    If it's vanos you can still turbo it Hobbs would be nice in the compact


    Sent from my iPhone using Tapatalk

  8. #8
    BMWHaus Contributor
    Join Date
    Sep 2014
    Posts
    431

    RE: M50b25 engine and box

    Quote Originally Posted by Steve320
    Quote Originally Posted by Hobbs
    Is it single or non-vanos? If its non-vanos i might take a chance on it.
    If it's vanos you can still turbo it Hobbs would be nice in the compact


    Sent from my iPhone using Tapatalk
    Haha!! Thats a fair point! Only problem is, i've an extreme dislike for turbo's! A supercharger though on the other hand............

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •