Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: BMW E36 - E46 parts clerance

  1. #1
    BMWHaus Site Sponsor
    Join Date
    Jul 2013
    Posts
    2,360

    BMW E36 - E46 parts clerance

    E36

    Cabrio front lower strut brace - 70eON HOLD
    Coupe cabrio rear clear lights ,pair - 30e
    Coupe cabrio clear indicators - 10e have by one 5e each
    Front wing indicators - 10e
    Msport steering wheel with air bag ,bmw badge damaged - 90e
    Headlights ,very good condition - 40e pair
    Coupe (sunroof ) black head lining complete kit - 50e
    Motorsport wheel Style 24 with tire - 50e
    M3 side skirts ,pair - 20e
    M3 lowering springs ,low enough - 40e full set 4 springs
    M3 front shocks EVO top mounts ,springs ,VGC - 80e
    M3 EVO front wishbones VGC - 80e pair
    Steering rack - 30e
    Speed clocks - 20e each
    High OBC clocks - 10e each other parts for upgrade 10e each
    Coupe cabrio bonnet ,think its arctic silver - 30e
    Coupe M3 boot lid spoiler - 50e
    Safety triangle - 10e
    Wheel wrench - 5e
    Other spanners ,tools - 2e each
    M3 front bumper ,cracked ,repaired ,drift car - 30e
    Coupe front wings ,pre facelift ,very minimal rust surface spots - 20e LH left
    Front main panels - 20e each
    M3 EVO flywheel with clutch kit - 100e
    M3 EVO front ARB roll bar with bushes and brackets - 30e ON HOLD
    Inlet manifold with trumpets - 50e
    Z3 M prop shaft - 50e
    E36 M3 EVO prop shaft - 50e
    Coupe door mirrors - 20e each
    Mtech door and wing moldings by one - 5 - 10e each
    E36 328i open diff - 100e


    E46

    Coupe boot lid with lip spoiler and inner lights ,blue - 50e
    Boot lid lip spoiler - 30e
    Saloon boot lid ,blue, with inner lights - 30e
    Saloon SE rear bumper - 20e
    Saloon SE side skirts - 20e
    Saloon front hand rest grey leather - 50e
    Coupe front black leather hand rest,VGC - 50e
    Light modules - 30e other modules
    CD changers - 50e each
    Msport door moldings - 10e each
    M3 rear brake discs ,suits track car - 20e
    Radio units - 20e
    Steering rack M3 - 50e ON HOLD
    Coupe door mirrors - 50e each not folding
    Saloon door mirrors - 20e each
    Open diffs from - 50e
    M3 front lower aluminum reinforcement plate - 10e
    Starter motor most engines - 30e
    M3 E46 exhaust back box - 50e
    M52TU exhaust complete - 50e
    Rear axle top aluminum arms - 10e each
    Rear axle camber arms E36 E46 all - 10e each
    E46 M3 door step sills - 30e

    and much more

  2. #2
    BMWHaus Guru
    Join Date
    Jul 2013
    Posts
    1,706

    BMW E36 - E46 parts clerance

    E36 316i diff but car has a M50 2.5 engine/box, would you have a diff to suit?

  3. #3
    BMWHaus Site Sponsor
    Join Date
    Jul 2013
    Posts
    2,360

    RE: BMW E36 - E46 parts clerance

    Quote Originally Posted by HealyC
    E36 316i diff but car has a M50 2.5 engine/box, would you have a diff to suit?
    Ill double check what diffs i have left ,but i think only 2.93 ratio left

  4. #4
    Moderator
    Join Date
    Jul 2013
    Posts
    2,077

    RE: BMW E36 - E46 parts clerance

    Passenger Door M Moulding for E36 Coupe?

    The rear track (For the clips) needs to be perfect not split or any rust.

  5. #5
    BMWHaus Guru
    Join Date
    Jul 2013
    Posts
    1,852

    Re: BMW E36 - E46 parts clerance

    Would you have the aluminium diff carrier bracket for e36 EVO?

    Sent from my WT19i using Tapatalk 2

  6. #6
    BMWHaus Contributor
    Join Date
    Sep 2014
    Posts
    431

    RE: BMW E36 - E46 parts clerance

    Ill take the e36 m3 throttle bodies, inlet manifold and trumpets if theyre still there?

  7. #7
    BMWHaus Site Sponsor
    Join Date
    Jul 2013
    Posts
    2,360

    RE: BMW E36 - E46 parts clerance

    Quote Originally Posted by Hobbs
    Ill take the e36 m3 throttle bodies, inlet manifold and trumpets if theyre still there?
    yes still here :wink:
    [hr]
    Quote Originally Posted by Paddy
    Would you have the aluminium diff carrier bracket for e36 EVO?

    Sent from my WT19i using Tapatalk 2
    Have only broken one , and have done welding on one of them before if u really stuck

  8. #8
    BMWHaus Site Sponsor
    Join Date
    Jul 2013
    Posts
    2,360

    RE: BMW E36 - E46 parts clerance

    Quote Originally Posted by RossYB
    Passenger Door M Moulding for E36 Coupe?

    The rear track (For the clips) needs to be perfect not split or any rust.
    im 99.9 sure i have it ,and do have pictures of other Z3M parts as u asked before

  9. #9
    BMWHaus Contributor
    Join Date
    Sep 2014
    Posts
    431

    RE: BMW E36 - E46 parts clerance

    Quote Originally Posted by Valdelisbmw
    Quote Originally Posted by Hobbs
    Ill take the e36 m3 throttle bodies, inlet manifold and trumpets if theyre still there?
    yes still here :wink:
    [hr]
    Quote Originally Posted by Paddy
    Would you have the aluminium diff carrier bracket for e36 EVO?

    Sent from my WT19i using Tapatalk 2
    Have only broken one , and have done welding on one of them before if u really stuck
    Sound man ill pm you to arrange collection.

  10. #10
    Moderator
    Join Date
    Jul 2013
    Posts
    2,077

    RE: BMW E36 - E46 parts clerance

    Quote Originally Posted by Valdelisbmw
    Quote Originally Posted by RossYB
    Passenger Door M Moulding for E36 Coupe?

    The rear track (For the clips) needs to be perfect not split or any rust.
    im 99.9 sure i have it ,and do have pictures of other Z3M parts as u asked before
    Shoot me a PM when you get a chance to check the moulding and send on the pics of the Z3 M vents whenever you get a chance!

    Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •