I have a k7 with all the accessories and an extra 10 metre hose so its fantastic and its a powerful machine and i have done patios, cars and everything around the house. only issue i have is the lcd display on the lance is supossed to pair with the machine so you can regulate the pressure and now it wont pair, so its either stuck on min or max , i have to send it back to karcher whenever they are open again
Funny I swapped a faultless Karcher last summer for a Nilfisk C120, which proceeded to pack in within 4 or 5 months. In fairness Nilfisk sent out a new one with no questions askedOriginally Posted by Curran
From my time as a youngster working in a large DIY chain, Karcker usually want it back, try to fix it, fail and eventually send a new one. Less hassle with Nilfisk
I have a kranzle, different league to a karcher
Before you bin your washer that will not start have a look at the clip below . I removed the white plastic On/Off plunger type thing and cleaned it and put a tiny film of waterproof grease on the plunger rod and rubber seal ( which is part of the recommended maintainance ) and the nilfisk C120.3 it still going strong after 7 years
Ps dont bother pulling out the bottom part with a piece of wire as per the video just have a look to see that little hole is clear
https://www.youtube.com/watch?v=n93u2YIv-6E&t=78s
Last edited by dub320d; 17-07-21 at 09:10.
Posting Permissions
Reply With Quote