Results 1 to 6 of 6

Thread: Inpa lambda reading

  1. #1
    BMWHaus Contributor
    Join Date
    Aug 2013
    Posts
    619

    Inpa lambda reading

    Car is not running 100 %. Very small splutter at low revs, feels similar to being in too high a gear, starts and idles perfect cold or hot, could this reading be pointing to the problem?

  2. #2
    BMWHaus Guru
    Join Date
    Jul 2013
    Posts
    1,786

    Inpa lambda reading

    I don't see anything wrong there but I'm not well up on lambda stuff, any check engine light or fault codes?
    Could be a dodgy coil or MAF, could be anything really.

  3. #3
    BMWHaus Contributor
    Join Date
    Aug 2013
    Posts
    619

    RE: Inpa lambda reading

    No codes at all I could find, I replaced all the spark plugs, would it not idle rough with a dodgy coil or maf?

  4. #4
    BMWHaus Guru
    Join Date
    Jul 2013
    Posts
    1,786

    Inpa lambda reading

    I had a dodgy HT lead a few years ago, it seemed to only manifest itself under load.

  5. #5
    BMWHaus Contributor
    Join Date
    Aug 2013
    Posts
    619

    RE: Inpa lambda reading

    Hmmmmmm cheers for that john, might be worth picking one up and tryin it on each plug and see if it makes any difference

  6. #6
    BMWHaus Contributor
    Join Date
    Aug 2013
    Posts
    619

    RE: Inpa lambda reading

    still bugging me i disconnected the maf and the car felt exactly the same, idle was pure smooth and car seemed to drive normal, should a disconnected maf not cause the car to be rough?
    sexy 6 potter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •