Badly stuck for a diff, it's for a 1.6 1997 e36 saloon, a welded one would be handy but ill take a standard one also, whichever comes first.. need it as soon as possible and the closer to Limerick, the better
Badly stuck for a diff, it's for a 1.6 1997 e36 saloon, a welded one would be handy but ill take a standard one also, whichever comes first.. need it as soon as possible and the closer to Limerick, the better
I have a couple of small case open diffs from 318 is's if any use. Im in wex and can post do paypal
I'll find out will it fit and get back to you, as I got two different ones from a scrappy and neither fit
316i/18i/18is/20i are all the same - small case 3:45
Right, just the first diff I got was a 1.5 lsd one, it didn't fit, brought it back and got another, the 6 bolt patterns matched up but the drives weren't long enough to reachOriginally Posted by Peter-E36
316i/18i/18is/20i are all the same - small case 3:45
The 3.45 referres to the diff output ratio, the 1.5 is to do with acceleration/brake effectiveness of the locking mechanism in an LSD.
Are you saying the driveshafts were the incorrect ones? Why not just change them instead?
Pm replied to.
I've a diff I'm in limerick will weld if required. PM me
Posting Permissions
Reply With Quote