Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: E46 - Radiator fan removal tool

  1. #1

    E46 - Radiator fan removal tool

    Where would I pick up one of these tmrw morning? Have a water pump to change out :-/

  2. #2

    RE: E46 - Radiator fan removal tool

    Edit: Being smaller, do 4 cyl engines have enough room to do the job without fan removal? No mention of this step in the Pelican DIY below:

    http://www.pelicanparts.com/BMW/techarticles/BMW-Z3/30-WATER-Water_Pump_Replacement/30-WATER-Water_Pump_Replacement.htm

  3. #3
    BMWHaus Site Sponsor
    Join Date
    Jul 2013
    Posts
    1,351

    RE: E46 - Radiator fan removal tool

    Quote Originally Posted by Roberto
    Edit: Being smaller, do 4 cyl engines have enough room to do the job without fan removal? No mention of this step in the Pelican DIY below:

    http://www.pelicanparts.com/BMW/techarticles/BMW-Z3/30-WATER-Water_Pump_Replacement/30-WATER-Water_Pump_Replacement.htm
    Hi Roberto,

    If it is the 32mm long spanner you are looking for in order to remove the viscous fan I have these in stock. Genuine BMW item, they are €24.95.

    See link below to 32mm fan coupling spanner in question :

    http://www.schmiedmann.co.uk/en/prod...oduct=B-A1022A

    If you require this type of dismount tool then I have these also, they are €47.32.

    See link below to fan coupling too :

    http://www.schmiedmann.co.uk/en/prod...#Sendtoafriend


    Removing the fan makes life a lot easier and will shorten the time taken.

    EDIT : Apologies just seen this is questions is related to E46's... Bloody E36's on the brain.


    Hope this helps,

    Cab

  4. #4
    Moderator
    Join Date
    Jul 2013
    Posts
    8,000

    RE: E46 - Radiator fan removal tool

    What engine is it? from memory n42 is electric fan no need for spanner if m54 then the viscous fan will have to come off

  5. #5

    RE: E46 - Radiator fan removal tool

    Thanks for the reply (and for the links that I went WAY off topic following!) I'm in work until this evening and plan to work on it tmrw morning so I'll definitely keep you in mind for next time.
    [hr]
    Quote Originally Posted by Gar
    What engine is it? from memory n42 is electric fan no need for spanner if m54 then the viscous fan will have to come off
    N43 1.9 I think. Was dark (and bloody cold) last night looking at it. Fingers crossed it's straight forward.

  6. #6
    Moderator
    Join Date
    Jul 2013
    Posts
    8,000

    E46 - Radiator fan removal tool

    I'd say it's this m43b19 plenty of room to work and no need for the 32mm spanner
    [hr]
    Can't upload pics at the moment for some reason

  7. #7

    RE: E46 - Radiator fan removal tool

    Quote Originally Posted by Gar
    I'd say it's this m43b19 plenty of room to work and no need for the 32mm spanner
    Nice one, thanks for that. Brace for panicked numpty questions tmrw when I'm in the middle of it

  8. #8
    Moderator
    Join Date
    Jul 2013
    Posts
    8,000

    E46 - Radiator fan removal tool


    [hr]
    Ah finally got it

  9. #9

    RE: E46 - Radiator fan removal tool

    That's the puppy.

  10. #10
    BMWHaus Site Sponsor
    Join Date
    Jul 2013
    Posts
    1,351

    RE: E46 - Radiator fan removal tool

    Sorry Roberto, just realized your OP was for E46 related question, I've bloody E36's on the brain . Like Gar said plenty of room to work with .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •