M-ASK2 coding

[John_D]

I used tool32 to change the vin of mask2.prg
However all the modules in the mask still show the wrong vin
I wonder is the MOST GW not working right due to a wrong vin or a newer firmware not compatible with my TCU..?

[John_D]

I used tool32 to change the vin of mask2.prg
However all the modules in the mask still show the wrong vin
I wonder is the MOST GW not working right due to a wrong vin or a newer firmware not compatible with my TCU..?

Further developments.. i'm getting intermittent connection with the TCU as i`m driving. The TCU will always pair with my phone but every few seconds will connect with the M-ASK then drop off, all the while the radio sounds are cutting in and out and i-drive becomes unresponsive. pulling the bypass loop restores i-drive and audio.
i re-installed the old CHAMP and everything works perfectly as it should, BT connects straight away and no MOST interruptions.

so the problem is 100% with the new M-ask2 nav unit. should i bother trying to flash it(especially the MOST gateway) or try to return it ?

Any advise appreciated...